Motorola APX 900 Accessories
The Power of Your Radio Unleashed
Simple, clear voice communication is a "must have" for your operation. Motorola’s radio portfolio is renowned for clearly better connections and workforce collaborations. Motorola realizes that to help you excel in your job you need accessories that match the performance of your radios - that truly fit your work environment. When you use our accessories with your radios, you are simply more efficient, and safer.
That’s why it’s important to use Motorola Original® accessories for your Motorola APX 900 Portable Radio. They’re the only ones designed, built and tested with your Motorola radio to optimize its performance. Only Motorola accessories unleash the full power of radio.
Combine Motorola’s best-in-class radios with Motorola accessories to achieve even greater efficiency and cost savings. Together, you’ll rethink what’s an accessory - and what’s a necessity.
Contact us with any questions you may have on the accessories listed below.
Antennas
 | NAF5080 700/800 MHz Flexible Whip Antenna |
 | NAF5088 Coaxial Flexible Whip Antenna, 896-941 MHz |
 | PMAD4088 VHF, 136-174 MHz, Flexible Whip Wideband Antenna, |
 | PMAD4093 VHF, 136-147 MHz, Stubby Antenna |
 | PMAD4094 VHF, 147-160 MHz, Stubby Antenna |
 | PMAD4095 VHF, 160-174 MHz, Stubby Antenna |
 | PMAE4022 UHF, Flexible Whip Antenna |
 | PMAE4094 UHF, 420-445Mhz, Stubby Antenna |
 | PMAE4100 UHF, 380-470 MHz, Stubby Antenna |
 | PMAE4102 UHF, 450-527 MHz, Stubby Antenna |
 | PMAF4022 700/800 MHz Stubby Antenna |
Audio Accessories
Remote Speaker Microphone (RSM)
 | PMMN4062 IMPRES RSM with NON-Threaded Audio Jack, Orange Button, Noise Cancelling (IP54) |
 | PMMN4065 IMPRES RSM with Volume Toggle Switch, Orange Button and 1-Programmable Button, Windporting (IP57) |
 | PMMN4069 IMPRES RSM with NON-Threaded Audio Jack, Windporting (IP55) |
 | PMMN4099 IMPRES Windporting RSM with Volume Toggle Switch, Orange Button, 3.5mm NON-Threaded Jack (IP68) |
 | HMN4101 IMPRES RSM, No display |
 | HMN4103 IMPRES RSM, Display, no channel knob |
 | HMN4104 IMPRES RSM, Display and channel knob |
| 3075336B17 Replacement Coil Cord Kit for HMN4104, 4103 and 4101 |
 | NNTN4990 D Ring Swivel Clip (12 pack). Compatible with all XP RSMs and wireless RSMs |
 | PMKN4107 Interface Cable, 5-Pin Nexus Female Receptacle for HMN4104, HMN4103 and HMN4101 |
 | PMKN4112 Interface Cable 4-Pin Nexus Male Plug for HMN4104, HMN4103 and HMN4101 |
 | PMKN4113 Interface Cable, 12-Pin Hirose Male Connector for HMN4104, HMN4103 and HMN4101 |
 | RLN6075 Replacement Coil Cord Kit for PMMN4062, PMMN4065, PMMN4069, PMMN4083 and PMMN4099. |
Surveillance Kits & Earpieces
 | PMLN6125 1-Wire Receive-only earpiece, black |
 | PMLN6126 1-Wire Receive-only earpiece, beige |
 | PMLN6127 IMPRES 2-Wire Surveillance Kit, programmable button, black |
 | PMLN6128 IMPRES 2-Wire Surveillance Kit, programmable button, beige |
 | PMLN6129 IMPRES 2-Wire Surveillance Kit with translucent tube, programmable button, black |
 | PMLN6123 IMPRES 3-Wire Surveillance Kit with translucent tube, programmable button, black |
Headsets
 | PMLN5101 IMPRES Temple Transducer with boom microphone and inline push-to-talk 7580384M19 - Replacement rubber temple cover (1 pair) |
 | PMLN5102 Ultra Lite Headset |
 | PMLN6852 Heavy-Duty Behind-the-Head Headset with Noise-Cancelling Boom Microphone, Noise Reduction = 24dB |
 | PMLN6853 Heavy-Duty Behind-the-Head Headset with Noise-Cancelling Boom Microphone, Noise Reduction = 24dB |
 | PMLN7466 Heavy-Duty Over-the-Head Headset with Noise-Cancelling boom Microphone, Noise Reduction = 24dB |
 | PMLN7467 Heavy-Duty Over-the-Head Headset with Noise-Cancelling Boom Microphone, Noise Reduction = 24dB |
 | RLN6490 XBT Operations Critical Wireless Behind-the-Neck Headset |
 | RLN6491 XBT Operations Critical Wireless Headband Style Headset |
 | RMN5058 Lightweight Over-the-Head Headset single muff with in-line push-to-talk and boom mic REX4648 - replacement foam earpad and microphone cover kit |
Operations Critical Wireless Accessories (OCW)
 | NNTN8125 Operations Critical Wireless Earpiece with 12 inch Cable |
 | NNTN8127 Operations Critical Wireless Push-to-Talk Pod with Charger |
 | PMLN7052 1- Wire Surveillance kit with Translucent Acoustic tube for Wireless PTT Pods |
 | PMLN7851 EP900W Opertions Critical Wireless Earpiece with PTT |
| RLN6490 XBT Operations Critical Wireless Behind-the-Neck Headset |
| RLN6491 XBT Operations Critical Wireless Headband Style Headset |
 | NNTN8294 1- Wire Earbud for Wireless Push-to-Talk pod with 11.5” cable, Black |
 | NNTN8295 1- Wire Earbud for Wireless Push-to-Talk pod with 45” cable, Black |
 | NNTN8296 Covert Audio Kit for Mission Critical Wireless PTT Pod |
 | NNTN8434 Accessory Kit, Completely Discreet Wireless Surveillance Kit |
 | NTN2572 Replacement Wireless Earpiece 12 inch cable |
 | NTN8821 Wireless Earpiece Maintenance Kit with 10 Silicone Ear Tubes, 10 Microphone Seal Strips and 2 Foam Windscreens for NTN2572 Over-the-Ear Earpiece |
 | NTN8988 Ear Strap for CommPort™ Earpiece to Secure Earpiece to Ear (10 per pack) |
 | PMLN7203 Flexible Earpiece With Boom Microphone for RLN6500 |
 | RLN5037 Eartubes for CommPort™ Earpiece (10 per pack) |
 | RLN6500 Bluetooth Accessory Kit with Flexible Earpiece, Bluetooth Pod, and Charging Cradle with Power Supply |
Batteries
Motorola IMPRES Two-way Batteries
 | NNTN8128 IMPRES Li-Ion 2000 mAh Slim, Submersible, Battery-IP67 |
 | PMNN4424 IMPRES Li-Ion 2350 mAh Submersible, Battery-IP67 |
 | PMNN4448 IMPRES Li-Ion 2800 mAh Submersible, Battery-IP67 |
 | PMNN4489 IMPRES Li-Ion 2900 mAh Battery, IP68 |
 | PMNN4491 IMPRES Li-Ion 2100 mAh Battery, IP68 |
 | PMNN4493 IMPRES Li-Ion 3000 mAh Battery, IP68 |
Chargers and Reconditioners
Desktop, Single & Multi-unit Chargers
 | PMPN4174 IMPRES Single-Unit Charger, 115V |
 | PMPN4284 IMPRES Multi-Unit Charger, 115V |
 | BR000272A01 Wall mount bracket for PMPN4284 Charger |
Vehicular, Travel Chargers & Vehicular Adapter (VA)
 | NNTN7616 IMPRES Single-Unit Rapid Rate Vehicular Charger |
 | NNTN8525 Travel Charger with voltage regulated vehicular charger adapter, custom charger base, mounting bracket, and coil cord |
Carry Solutions
 | PMLN5838 Leather case with 3-inch fixed belt loop |
 | PMLN5840 Leather Carry Case with 3” Swivel Belt Loop |
 | PMLN5842 Leather case with 2.5-inch swivel belt loop |
 | PMLN5844 Nylon Case with 3-inch fixed belt loop. For radios with display |
 | PMLN4651 2” Hard Plastic Belt Clip |
 | PMLN5610 2.5-inch Leather Swivel Belt Loop, CSA |
 | PMLN5611 2.5-inch Swivel Belt Loop |
 | PMLN7008 2.5” Hard Plastic Belt Clip |
 | 15012157001 Accessory Connector Dust Cover |
